There are several lights on the Linksys WiFi router which presents its status. One of them is purple color that means the Linksys router is powered on and it is ready for the setup. But if it is stuck and won’t turn off, it means something is not good. Here you will get to know major and main troubleshooting tips to make the light off. So, let’s start:

*Fixes: Linksys Router Purple Light *

These fixes and tips are mostly used to fix the light related problems on the Linksys WiFi router. The problems are provided by the experts and you can apply them without hesitation.

Power Cycle/Reboot Linksys Router

Unplug the router and the modem. Not just one. Both. Wait a full 30 seconds. Plug the modem back in first. Wait for all the lights to come back solid (can take a minute or two). Then plug in the Linksys router. Give it 2-3 mins. Still Linksys purple light is there? Cool. Keep going.

Check Your Internet Straight from the Source.

Unplug the Ethernet cable from the back of the Linksys.
Plug that same cable straight into your laptop or PC.
Do you get internet that way?

• Yes? Problem is on the router’s side.

• No? Call your ISP. Your modem isn’t pushing internet. Not a Linksys problem.
  Assuming you do get internet directly move on.

Reset the Linksys router

Grab a paperclip. Look for the little reset hole on the back of the router. Hold it down for at least 10 seconds (LED should start blinking). Let it reboot. This takes a few mins. Don’t freak out if it looks dead for a bit. Once it’s back up, you’ll need to re-setup everything — Wi-Fi name, password.

How to Reconfigure?

• Link up your computer with your router WiFi network via SSID default details or Ethernet cable.
• Then, go into any web browser and search the extender’s login URL linksyssmartwifi.com or myrouter.local or the IP address 192.168.1.1.
• The Linksys router login page will appear on the PC screen, just enter default admin login password and username. Look for the default credentials on the router’s back label.
• You will reach inside the interface and here you need to enter the router’s new network name and password.
• On the next page, you will be walked through all the settings one by one by the interface just adjust accordingly, then SAVE it to apply all the settings

Re-setup using the app or browser.

Use the Linksys app (iOS or Android) or just go to http://192.168.1.1 in a browser. It’ll Walk you through setup — WAN detection, SSID, password, etc.

The Linksys app is available on the App Store or Play Store where you can easily download it. Is you want to go for the interface; you should connect with the Linksys router network and then use the default login credentials to access the interface.

If it still shows purple after all this? Could be:

• A firmware glitch
• A bad WAN port
• Some weird ISP authentication issue (like PPPoE, static IP needed, etc.)

Manually check internet settings.

During setup, when it asks for connection type — don’t just leave it on Auto.
Try setting it to:

• DHCP (most ISPs use this)
• Or if your ISP gave you specific settings (static IP, PPPoE), enter those manually.

Firmware update (if you can get in)

Access the interface on your computer or laptop with the help of the IP address 192.168.1.1 or linksyssmartwifi.com. Inside the interface go to: Connectivity > Firmware Update. Check if it’s up to date. If not update it. Sometimes this alone kills the purple light.

Check Linksys App

You should download the Linksys app in your phone through the Play Store or App Store. Then access the app with the help of the admin login or create the Linksys account from the Email ID address.

The Conclusion

Hope, by using these troubleshooting tips and solutions you have fixed the Linksys router purple light and now complete the WiFi setup through the linksyssmartwifi.com interface.